Call Us +353 1 807 7600 · sales@abcokovex.com

Lantech Erector C 300

Square cases are the key to successful secondary packaging.
Lantech Case Erectors are the key to square cases.

Introduction

Setting New Standards. Lantech Erector C 300 has always stood for cutting edge innovation and our C-Series case erectors continue that tradition. We’ve set new standards for productivity and efficiency in easy to use machines for case erecting applications

If you want to automate the process of erecting cases or want to simply upgrade or replace older equipment, you’ll want to take a look at the many advantages we offer for your operation

Standard Case Erector

  • Faster, safer and more productive than manually formed cases
  • Fewer machine jams than other case erectors in its class
  • Compact, small footprint

Quick and easy to operate

  • Ergonomic design of the magazine allows easy loading of blanks
  • Linear adjustment wheels, counters and a help chart make case adjustments easy to do

View BrochureVideo

Providing creative solutions to help customers increase productivity.

Providing creative solutions to help customers increase productivity.

Ergonomic Blank Loading

Lantech Erector C 300 is easy to load magazine. Replenish blanks while machine operates. Simple and fast magazine adjustments.

Blank Delivery Control

Powered belts precisely govern the delivery speed of the case blanks. Blank retainers ensure the blanks are spaced correctly.

Blank Separation

Special separators release only the leading blank to the pickup frame and retain the following blanks.

Square Case Erecting

Eight vacuum powered suction cups hold the blank in the correct position after it leaves the magazine. Both leading panels are held securely.

Stationary Flap Folding

Once the case is square, it remains square by folding the flaps while it’s stationary. This makes the case rigid and locks in the 90 degree angles.

Square Case Transition

A pusher bar, parallel to the rear wall of the case, pushes it into the sealing section where spring-loaded side belts automatically adjust for any width variations.

AVAILABLE OPTIONS

NON-STANDARD CASE DIMENSION
Machine can be modified for a variety of case dimensions. Please contact Lantech for details.


BEACON
Colored lights indicate the status of the machine, blanks supply, and tape or hot melt supply.


COMMUNICATION
Various communication configurations possible. Please contact Lantech for details.


EXIT HEIGHT EXTENSION
The exit height of the cases can be extended in increments of 50mm up to a maximum of 850mm.


TAPE HEAD STORAGE BRACKET
Holds additional tape head.


75MM TAPE HEAD
Applies 75mm wide tape. Replaces standard 50mm tape head.


C-300 CASE ERECTOR SPECIFICATIONS

PERFORMANCE
Throughput Speed 10 cases per minute
Case Size Minimum
(Outside Dimensions)
200 mm L
150 mm W
150 mm C
(7 7/8″ L x 5 7/8″ W x 5 7/8″ C)
Case Size Maximum
(Outside Dimensions)
500 mm L
350 mm W
600 mm C
(19 5/8″ L x 13 3/4″ W x 23 5/8″ C)

CASE CRITERIA
Case Types RSC. HSC, FEFCO 0200/0201
Flute Types B, C
Wall Types Single wall
(test for multiple wall)

BOTTOM SEAL
Air Supply 6 Bar (80 Psi)
Electrical Service 3L-PE-400V-50 Hz-Neutral

MACHINE DATA
Magazine infeed Capacity 200 cases (approximate)
Weight 525 kg (1155 lbs)
Dimensions 2140 mm L
2230 mm W
1600 mm H
(84 1/4″ L x 87 3/4″ W x 63″ H)
Outfeed Pass Height 600 mm ± 30 mm
(23 5/8″ ± 1 1/8″)

WARRANTY
3 Year. Unlimited cycles

IMNDA DONATION